The concept of 5-axial vertical turning machining center
In order to achive motion movement identical to motion along the y-axis, which on vertical lathe don't exist , working table have capability of separation from the main drive and connecting to the feed drive.
This would generate the C-axis machines, whose rotating and moving the x axis according to the appropriate law comes movement, which corresponds to motion along the y axis.
In this way the movement is obtained which corresponds to motion in the xy plane.
Pinola machine, which carries a lathe tool, is replaced by the turning, milling and drilling unit with its own drive.
By this vertical lathe gets the ability to process as if it is a triaxial vertical miling machine.
Coordinate systems of machine parts
| Link | Variable | d [mm] | α [°] | θ [°] |
|---|---|---|---|---|
| 1 | d1 [mm] | d1const | α1=90°, α'1=90° | θ1 [°] |
| 2 | d2 [mm] | 0 | 0 | 0 |
| 3 | θ3 [°] | 0 | α3=90° | θ3pom=90° |
| 4 | θ4 [°] | 0 | α4=-90° | 0 |
| C | c [°] | 0 | 0 | 0 |
The parameters of machine parts
Transformation graph of the 5 axis vertical lathe machining center
Last Updated on Friday, 19 June 2009 15:21